Paragon CS19S Kiln Truck Shipments Only.

Paragon CS-19S Kiln

Paragon’s square CS-19S digital glass clamshell kiln is easy to load, because the top lifts out of the way. Load the shelf first and then the glass onto the shelf. The CS-19S clamshell heats from the top for even heat distribution across the glass surface. The elements are completely embedded in a lightweight ceramic fiber top. The top has no element grooves or pins; this streamlined design helps eliminate dust in the firing chamber. The kiln is easy to open because of three counter-weight springs mounted under the kiln. The kiln base extends 4” in the back to support the weight of the kiln when in the open position. The base comes with mar-proof rubber feet. The walls and bottom are made from hand-selected insulating firebricks. The CS-19S has a two-year warranty. Digital Controller You will enjoy the convenience of digital firing. The reliable solid-state Sentry Xpress controller continually monitors the firing so you do not need to closely watch the kiln. The reliable Sentry Xpress 3-key controller includes two modes: Single Speed and 8-segment Ramp-Hold. Control both heating and cooling with simple 3-key operation. Features of the Sentry Xpress 3-key Controller Program up to 8 segments (steps) in Ramp-Hold mode. Fire to a single temperature at a single speed in Single Speed mode. Store up to 4 programs in Ramp-Hold mode. Skip a segment in Ramp-Hold without having to stop the kiln to reprogram. (For instance, you want to skip to the annealing segment.) Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram. Hold (soak) the temperature in both Single Speed and Ramp-Hold. Add Hold Time during firing without having to stop the firing to reprogram. Easily control both heating and cooling in Ramp-Hold. Program Review lets you check the program you are about to fire. Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln at a time that best suits your busy schedule. Error Messages report mechanical problems. LED Lights show whether you are in program, review, or firing mode.

Kiln Specifications:

• Max. Temperature: 1700F (926C)
• Amps: 16
• Watts: 3840
• Nema: 6-20R
• Voltage: 240
• Hertz: 60
• Chamber Dims: 19"L x 19"W x 6.5"D (48L x 48W x 17D)
• Shipping Dims: 39"W x 35"D x 24"H (99W x 89D x 61H cm)
• Shipping Weight: 215 Lbs. (97.52 Kg.)